BTUN-02
AM/FM TUNER WITH RS232
Manual Preset Programming:
Tune to a desired station, press the MEM button to flash MEM in the LCD display. Press any two numbers between
01 and 32 to save the station into the two numbers pressed.
Accessing a Preset Station:
Pressing any two numbers between 01 and 32 on the remote control keypad will tune the BTUN-02 to the preset numbers
pressed. If there is no station stored at that location, no change will take place.
Direct Frequency Tuning:
Pressing the DIR button, followed by the frequency of a desired station, will tune the BTUN-02 to that frequency directly.
Preset Scan
Pressing the PRESET button starts a scan among the memorized stations. Press the UP or DOWN button to change the
direction of the scanning. Press the PRESET button a second time to stop at the last station scanned.
Changing IR Code
The BTUN-02 can respond to one of the three sets of IR codes. Multiple tuners can be used in one occasion without
interference. If multiple tuners are needed in your application, two more remote controls carrying IR2 code and IR3 code
need to be ordered or the tuners need to be controlled via RS232.
The remote controls are colour coded; the second one comes with a red dot or red bottom and is for IR2 remote codes,
a third one comes with a white dot or a white bottom and is for IR3 codes. Refer to the paragraph “Changing IR Code” in
the Tuner Operation section in page 6 to change the IR code of the BTUN-02 to respond to a different remote.
RS-232 Codes
BTUN-02 RS-232 codes are available in the back of this manual.
Limited Warranty
Subject to the terms and conditions stated below, Boxxline BV warrants to the original owner that this model
BTUN-02 shall be free from defects in workmanship or materials for a term of two (1) years from its date of purchase
from an Authorized Boxxline Dealer
. Transfer of this product by its original owner (the ‘Owner’) will automatically
terminate this Warranty regardless of when occurring.
This warranty does not cover any of the following: (a) cabinetry, trim, or other appearance items (except where they are
defective at the time of original sale and the Product is delivered for repair within the first thirty days (30) thereafter): (b)
failures arising from accident, catastrophe, misuse, neglect, or failure to properly connect and operate the product in
accordance with the accompanying instruction: (c) failures arising from improper installation of the Product or
incompatibility of other components in the system of which the Product is a part: (d) failures of any kind in products (i)
which have been purchased from other than Authorized Boxxline dealers, or (ii) which evidence any tampering,
alteration, or attempted servicing by anyone other than Boxxline; and Boxxline shall have no liability or obligation of any
kind with respect to any of the foregoing losses types of failures.
To obtain service under this Warranty, the Owner must first obtain from Boxxline Return Authorization Number, and must
then, at the owner’s expense (i) arrange for any necessary de- installation of the Product, and (ii) deliver or ship the
Product, properly packaged and clearly ident- ified with the Return Authorization Number, prepaid, and insured, to Boxxline
at the address shown below.
In addition, the Owner must provide evidence that the Product is at the time of delivery within the scope of this Warranty,
by including the ORIGINAL, dated sales receipt with the Product when submitted for repair.
