25
English
Changing the lamp
The projection display will detect the lamp life itself. It will show you a warning
message “ Lamp is running out of standard lifetime. Be sure to replace the lamp as
soon as possible.”. When you see this message, change the lamp as soon as
possible.
Make sure the projection display has been cooled down for at least 30 minutes
before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before changing
lamps!
4
Lamp Changing Procedure:
1. Turn off the power to the projector by
pressing the Power/Standby button.
2. Allow the projector to cool down at
least 30 minutes.
3. Disconnect the power cord.
4. Use screwdriver to remove the screw
from the cover.
5. Remove the cover.
6. Remove the 5 screws from the
lamp module.
7. Pull out the lamp module.
To replace the lamp module, reverse
the previous steps.
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch
the lamp bulb. The bulb may shatter and cause injury if it is dropped.
