5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 10 feet (3 m) of your power
source and within 6 feet (1.8 m) of your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear Projection”
on page 23 to reverse the image.
2
Position the projector the desired distance from the screen.
•
If the image is too big or too small, use the zoom ring to
adjust the size or move the projector forward or backward.
Figure 3 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 44.
F
IGURE
3
Projected image size at minimum zoom
3
Make sure the projector and the computer are turned off.
3.0
ft/
.9m
.
11
.8
ft/3
.6m
.
7.1
ft.
/2
.2m
5 ft
.
/1.5 m
12 ft./3.7 m
20 ft./6.1 m
