72
Network Control Software Application
Back
n
Register the projector(s) which needs to be controlled.
“ Auto search ” can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projector.
o
Group the projector(s) into different sections.
You can monitor the status easily by the sort of group name function in the network.
p
Monitor the status for each projector.
a.You can manage and change the monitoring content by System Parameter Setting.
E7KH/DPSWLPHU¿OWHUZRUNLQJWLPHRUV\VWHPZDUQLQJIHHGEDFNHWFFDQEHNQRZQ
by checking the status for projector(s).
q
Control the booked projector(s).
The status can be refreshed and acquired by monitoring functions; you can also
operate the function easily by Network Control.
NOTE
To monitor and control the projector(including stand-by mode), the following
conditions need to be ready:
(1) Projector should already be powered on.
(2) Projector is connected to network.
(3) LED light of the projector network port shows normal. (Green light on, Orange
twinkle)
*
6WDQGE\PRGHLQGLFWRU*UHHQ/('3RZHURQWKHSURMHFWRU¶VFRQWUROSDQHOÀDVKHV
NOTE: This Network Control Software Application is an optional function and support
model with RJ45 LAN port only.
Lan
