background image

2

WARNINGS

CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! 

Place the paper shredder in an area less accessible to children.

DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS 

SERIOUS INJURY MAY OCCUR. Paper shredders can pull children’s 

fingers into the shredder mechanism.

AVOID GETTING LOOSE CLOTHING OR JEWELRY NEAR THE  

FEED SLOT.

AVOID GETTING HAIR NEAR THE FEED SLOT.

NEVER spray any aerosol-based products in or around the shredder.  

NEVER use any petroleum based or flammable oils or lubricants in or 

around the machine, as some oils can combust causing serious injury. 

Lubricants specifically designed for shredders are acceptable.

DO NOT SHRED CREDIT CARDS.

DO NOT SHRED CD/DVD DISCS.

DO NOT SHRED BINDER CLIPS OR PAPER CLIPS.  

To reduce premature wear and tear of the rollers, whenever possible 

remove paper clips and staples from paper before shredding.

NEVER place the shredder near water or any heat source.  

Avoid direct contact with water. 

STOP USE IMMEDIATELY IF:

1.  The shredder motor makes loud and/or irregular noises  

during operation.

2.  Smoke or a burning odor becomes present.

Continuing to operate your shredder with any of the above  

conditions present could be potentially dangerous.

!

!

Summary of Contents for RS700

















Reviews: