Boxis AutoShred R700, User Manual

Page: 14 / 20

The.doors.can.be.locked.to.avoid.confidential.papers.from.being.taken.out.of.the.
paper.tray.by.other.people.
To LOCK a shred job.
•.Press.“Lock”.button..ENTER.PASSWORD.will.flash.on.LCD..
Enter.any.4-digit.PIN..Be.sure.to.remember.the.PIN..Press.
“Enter”.button.
•.COVER.UNLOCK.will.change.to.COVER.LOCK.on.the.LCD.
•.Both.doors.will.be.locked.mechanically..The.locking.process.
takes.approximately.3.seconds..After.the.locking.process.is.
completed,.flashing.COVER.LOCK.on.LCD.becomes.steady.
•.If.the.locking.process.cannot.be.completed.within..
7.seconds.the.locking.process.is.cancelled.
To UNLOCK a secured shred job in process.
•.Press.“Unlock”.button..ENTER.PASSWORD.will.flash.on.LCD..
Enter.the.4-digit.PIN..The.code.is.displayed..
Press.“Enter”.button..(In.case.the.PIN.has.been.
forgotten,.use.the.key.supplied.to.UNLOCK.on.
the.right.side.of.shredder.)
•.COVER.LOCK.will.change.to.COVER.UNLOCK.on.
the.LCD.
•.Both.doors.will.be.unlocked.mechanically..The.unlocking.
process.takes.approximately.3.seconds..After.the.unlocking.
process.is.completed,.flashing.COVER.UNLOCK.on.LCD.
becomes.steady.
NOTE: The paper tray doors will automatically UNLOCK
once the shred job has been completed.
To CANCEL password.
•.If.the.locking.or.unlocking.process.needs.to.be.interrupted,.
press.“Cancel”.button..The.locking.or.unlocking.process.will.
be.cancelled.
•.If.the.input.of.any.password.digits.is.wrong.during.the.Locking.
or.Unlocking.process,.press.“Lock”.or.“Unlock”..
button..The.password.is.reset.again.
To manually STOP a shred job.
•.Press.“STOP”.button..
To power OFF the shredder.
•.Toggle.OFF.the.power.switch..(S700.Model’s.power.
switch.is.on.the.top.of.the.machine..R700.Model.is.
on.the.right.side.of.the.machine.)
.. NOTE: Energy-Saving Technology — The S700 will
automatically toggle OFF if idle for 30 minutes.
To resume power just toggle switch back ON.
Locking for Secure Shredding