Routine Service and Maintenance
4.4
NOTE
: Extremely dusty or dirty working conditions may require more frequent checking,
filling and/or changing of engine oil.
d.
After filling the oil, wait a few minutes and check the oil level again.
4. Check engine coolant level.
The coolant is hot and under pressure. DO NOT check until the engine radiator is cool
to the touch.
•
The proper coolant level will be to the bottom of filler neck. (Item 1,
Figure 4–4
).
• The overflow bottle is a non-pressurized container that is only for any high heat overflow.
Do not add coolant to this container. It will not be drawn into the engine.
• If coolant is required, make sure to add the proper coolant as shown in the Engine Manual.
Figure 4-4 Engine Coolant Level Check
DO NOT check until the engine radiator is cool to the touch.
5.
Inspect the radiator to make sure that the air flow is not blocked. The fan located on top of
the unit is a suction fan, which draws air from inside the machine. Check the engine side
of the radiator (Item 1,
Figure 4–5
) to make sure that debris has not been sucked against
the radiator blocking air flow.
NOTE
: Some items in
Figure 4–5
have been removed for clarity.
CAUTION
NOTICE
1
CAUTION
