Page 9/23
February 2021
FLAIL MOWER | User manual
3.
ASSEMBLY AND SET-UP
Tractor Requirements
This hydraulic mower is designed for front use and equipped with a quick hitch hook. The oil flow should not exceed
45ltr/min and 160bar.
Assembly
Refer to the parts illustration.
Tractor & wheel loader Hook-Up
1.
Be certain that tractor draw bar will not interfere. Move draw bar ahead or remove if required. Draw bar should
also be checked for clearance when unit is being raised for the first time.
2.
Connect the quick hitch from the wheel loader into the hook of the mower.
3.
The mower should be run with the back 15 degrees lower than the front.
Driveline Installation
1.
Connect the oil lines to the tractor /wheel loader.
2.
Connect the IN on the hydraulic pressure line and the OUT on the hydraulic return line.
3.
Check the rotation direction of the mower.
CAUTION
Tractor PTO shield and all mower guards must be in place at all times during operation!
Model
Working
width
Recommended power
(hp)
Oil
(ltr)
Category
Weight
(kg)
Cutting
blade
WLF 1300
130
33 - 50
40 - 45
W.
320
22
WLF 1700
170
33 - 50
40 - 45
W.
353
28
