© Audio Trade GmbH · Pro-Ject Tuner Box S · Revision 2011.12.01
5
Display
A
Signal strength meter
B
Stereo reception
F
Mono reception
C
Fine tuning meter
D
Tuning mode.
toggles between the tuning modes
E
Tuned frequency
87.90
MANUAL
A
B
C
D
E
Manual program search
Press (approx. 3 seconds) repeatedly until the display shows
MANUAL
. increases the reception frequency
in 50kHz steps. decreases the reception frequency in 50kHz steps. The tuner is correctly adjusted for a stereo
broadcast when
A
the largest number of bars are shown (signal strength meter) and
B
two loudspeaker symbols are shown (
F
one loudspeaker symbol shows mono reception)
C
the vertical bar is centred in the fine tuning display
Automatic program search
Press (approx. 3 seconds) repeatedly until the display shows
AUTO
. starts the automatic frequency scan
upwards, will start it downwards. The maximum signal strength will be adjusted automatically for each
program found.
Program selection from memory
Press (approx. 3 seconds) repeatedly until the display shows
MEMORY
. will select the program with the
next memory position up the list, selects the program with the next memory position down the list. The
program’s memory position is shown to the right of
MEMORY
in the display.
Saving a program in the memory list
The memory of the Pro-Ject Tuner Box S can store up to 99 programs. Tune to the frequency of the program
to be stored. Press twice in rapid succession. The display will show
STORE
. selects the next memory
position up the list, selects the next memory position down the list. Press once on to store the program
at that position. The display shows
STORED
.
Saving a program to a particular memory position overwrites any program already stored at that
position. The memory retains its contents through a power off/on cycle.
