Parts:
• Cross Brace (#1)
• Left Stand Leg assembly from Step 1
• Right Stand Leg assembly from Step 2
Hardware
Qty
• 3" Screws (#12)
4
• Washers (#11)
8
• Nuts (#10)
4
Tools:
• Hex Key (7/32”)
3-1
Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)
using the hardware shown in
Figure 3
. Make sure that the narrower edge of the Cross Brace
(#1) is closer to the Stand Leg (#4) uprights.
Note:
Do not tighten hardware.
step
3
6
�
�
�
�
�
��
��
��
Figure 3
