Bowflex SelectTech 840 Kettlebell, Owner'S Manual

Page: 10 / 12

Problem Solution
Kettlebell handle does not fully
insert into base when no plates
are selected (handle has no plates
attached).
1. Make certain that the adjustment knob is set directly to the number 8.
Kettlebell handle does not fully insert
into base when plates are selected
(handle has plates attached).
1. Verify that the plates not selected (those plates remaining in the kettle-
bell base) are in the correct order and have not been switched. This
may be blocking the kettlebell from fitting back into the base.
Adjustment knob will not turn while
handle is in base.
1. Check to assure that the kettlebell handle is fully depressed into the
kettlebell base. If not fully depressed, the locking mechanism will not
be released and may prevent the adjustment knob from rotating.
2. Check to see if there is any dirt, debris or other obstruction in the
kettlebell base. You may need to remove the weight plates from the
base to accomplish this check. Remember to put each weight plate
back in the correct sequence and orientation.
Troubleshooting / Warranty
Warranty
(if purchased in US/Canada)
Who Is Covered
This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).
What Is Covered
Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions,
and provided it receives proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for
authentic, original, legitimate machines manufactured by Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.
Terms
• Parts (including hand assembly, weight plates and base assembly) 2 years
For warranty & service of products purchased outside US/Canada, please contact your local distributor. To find your local international distributor, go to:
www.nautilusinternational.com or www.nautilus.cn
How Nautilus Will Support the Warranty
Throughout and as set forth under the terms of the Warranty, Nautilus, Inc. will provide a replacement for any component or part that proves to be defective
in materials or workmanship. Nautilus, Inc. reserves the right to substitute material of equal or better quality if identical materials are not available under
this warranty.
In the event that replacement parts or components do not correct the issue, Nautilus, Inc, reserves the right to replace the product or apply a limited credit
reimbursement toward another Nautilus Inc. brand product, at our discretion. Reasonable substitution may be required depending upon Product availability.
Any replacement of the Product under the terms of the Warranty in no way extends the original Warranty period. THESE REMEDIES ARE THE EXCLUSIVE
AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.
10