Bowflex Max Trainer M5i Assembly And Owner'S Manual Download Page 5

Page: 5 / 52

Assembly / Owner’s Manual

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow

a workout area of a minimum 185.4 cm x 239 cm ( 73” x 94.1” ). Be sure that the workout space you are utilizing has adequate height clearance,

taking into consideration the height of the user and the maximum pedal height of the fitness machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

• Read and understand the “Important Safety Instructions” before

assembly.

• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to

the right (clockwise) to tighten, and the left (counterclockwise) to

loosen, unless instructed otherwise.

• When attaching 2 pieces, lightly lift and look through the bolt

holes to help insert the bolt through the holes.

• The assembly requires 2 people.

Machine Mat

The Bowflex Max Trainer™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your

floor. The rubber machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display or running er

rors. If possible, put your Bowflex Max Trainer™ Machine Mat in your selected workout area before you begin assembly.

To order the optional machine mat, contact your local distributor.

Specifications / Before Assembly

2.39m ( 94.1”)

1.85m

( 73” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

73” (185.4 cm) x 94.1” (239 cm).

159.8 cm

( 62.9” )

117 cm

( 46.1” )

63.5 cm

( 25” )

Maximum User Weight:

136 kg (300 lbs)

Total Surface Area (footprint) of equipment:

7429.5 cm

Maximum Pedal Height:

48.5 cm (19.1 inches)

Machine Weight:

63.4 kg (139.8 lbs)

Power Requirements:

Operational Voltage:

9VDC

Operating Current:

1.5A

AC Power Adapter:

220-240VAC, 50Hz

Complies with the following:

ISO 20957 Compliant

DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the prescribed

methods at an approved waste center.

Summary of Contents for Max Trainer M5i





















































Search results

Summary of Contents for Max Trainer M5i

Reviews:

Related manuals for Max Trainer M5i

Brands by name

Popular brands

Bowflex Max Trainer M5i, Assembly And Owner'S Manual

Search results

Summary of Contents for Max Trainer M5i

Reviews:

Related manuals for Max Trainer M5i

Brands by name

Popular brands