background image

15

How to Use Your Gym Style Ab Crunch Station

The Gym Style Ab Crunch Station gives you the 

ability to strengthen the muscles of the abdomen 

by safely adding resistance to abdominal exercises.  

When using the ab crunch station, position the pulley 

on the chest bar to align with the cable hookup on 

the upper pad assembly.

Adjust the seat and the lumbar support pad to fit 

your height.  You can also adjust the height of the 

upper pad assembly to fit your individual chest space 

requirements.  When the adjustments are complete, 

lock the pop-pin on the side support.  Connect the 

chest bar pulley cable:  first to the ring on the upper 

pad assembly, then to the desired Power Rod

®

 

resistance. 

Position yourself comfortably and securely on the 

seat.  With your right hand, push slightly forward on 

the round chest pad to take pressure off the pop-pin 

that holds the Upper Assembly in the pre/post 

exercise position.  With the left hand, slowly and 

firmly pull the pop-pin out, and rotate it one quarter 

turn to position the small stop pins in the pin saddle.  

This will enable the Upper Assembly support arm to 

pivot freely during your exercise.  Before exercising, 

ensure that the pop-pin is seated securely in the 

“out” position.  Slowly release your right hand to let 

the tension on the cable bring the chest pad to rest 

on your pectorals.  You can now begin the exercise.  

After completion of your exercise, make sure 

you engage the pop-pin prior to exiting and 

disconnecting the cable from the ring.

Safety:

•     Before using ab crunch station, make sure that the 

seat is secured on the seat support rail with the 

Seat Locking Pin.

•      Always use the lock knob on the slider to secure 

pulleys.  Do not allow pulleys to change position 

during any exercise.

•      Lock the pivoting arm in place with the pop-pin 

before and after using the ab crunch station.

Lumbar Support Pad

The lumbar support pad increases the 

effectiveness of the Abdominal Crunch exercise 

by increasing extension of the back.  

Place the lumbar support pad on the 

padded upholstery of the Seat Back, and 

fasten the adjustment straps behind the 

Seat Back. 

 

 

Adjust the height of the lumbar support 

pad as needed for a comfortable exercise 

position.  The pad should be positioned 

below your shoulder blades and above 

your hips.  This optimum position will be 

different for each person. 

Summary of Contents for Gym Style Ab Crunch Station





















Reviews: