6
4.5
If the frame flange is to be painted it should be
done at this stage. Any conventional, domestic paint
may be applied by brushing, rolling or spraying. Use
the supplied paint mask to avoid getting paint in the
cavity. Painting without using the paint mask risks
contamination of the internal connection terminals or
the grille attachment magnets. The diagram above
illustrates painting using the paint mask.
Note: If the grille is to be painted this should be
done “off-line” before it is fitted.
Note: The bezel is loosely fitted to the frame when
the speaker is shipped and can come away during
handling. This is not a problem as the bezel is held
in position when the QuickDogs™ are secured.
4.6
The baffle can now be fitted into the frame. Ensure
that the connector on the baffle is oriented correctly
with the connector in the frame. The baffle is held in
the frame by three push-lock fasteners. Push-lock
fasteners are secured by pushing the head inwards –
either with a thumb or a screwdriver. As they secure,
the fasteners will click. The baffle will then be secure in
the frame. The diagram above illustrates inserting the
baffle and securing the push-lock fasteners.
Note: Push-lock fasteners are released by turning
anticlockwise with a screwdriver.
= 1x
Summary of Contents for CCM6
Page 1: ...English CCM6...
