Assembly
12
Instructions for Use ERGOeco
BOWA-IFU-13120-ERGOECO-S0-EN-20220420
6 Assembly
Assemble the instrument in the following sequence:
1. Introduce the insert into the shaft tube.
2. Take hold of the jaw and carefully turn it to tighten it.
The shaft with insert is now ready to be mounted on the handle.
3. Whilst ensuring that the jaws are closed, introduce the shaft tube with insert into the
completely opened handle until you hear it click into place.
When the shaft with insert is aligned correctly and fully seated inside the handle,
moving the rear handle shank will cause the instrument’s jaws to move. The
instrument is now completely assembled.
Summary of Contents for ERGOeco
Page 1: ...13120EN S0 Instructions for Use ERGOeco en ...
Page 2: ......
