15
4-3 Interface
Note!
You may find that your machine has certain functions or some
parameters that are not described in this operating manual. Also, certain
illustrations may be very slightly different from the actual controls on
your machine. However, these controls function in exactly the same
way.
Fig. 4-3-1:interface
1.Control panel
Presetting and display of welding parameters
2.Negative output terminal (-)
Connect with work piece via ground cable in SMAW process.
Connect with torch in TIG process.
3.Positive output terminal (+)
Connect with electrode holder via welding cable in SMAW process.
Connect with work piece via ground cable in TIG process.
4. Nameplate
5. Cooling fan
Cool down the heat components in the welding machine.
6. Power cord
It is 4-pin cable. The mixed-colored wire must be firmly grounded(PE), the rest
wires connect to corresponding power supply.
