6 Operation
30
ARC 100 Operating Manual
900-100_IFU-V1.0_11587-S0-20141209-EN
6.
Operation
6.1.
Mode overview
An overview of the modes that can be employed with the HF device is
shown below.
Mode icon
Designation
Monopolar cutting - Pure
Monopolar cutting - Dry
Monopolar coagulation - Moderate
Monopolar coagulation - Forced
-
Bipolar coagulation
The data about points of application and the use of instruments is based on
clinical practice. However, these are only basic guidelines which must be
tested and approved for suitability by the operator. Depending on the
individual conditions, it may be necessary to deviate from the specified data.
Medicine is continuously evolving and growing due to R&D and clinical
practice. These developments may also make deviations from the specified
data necessary.
Please contact the medical product consultants authorized by BOWA
regarding recommendations for settings.
