www.boutiquecamping.com
|
+44 (0) 203 394 2986
|
3.
5.
6.
Take the centre pole inside the tent, find the centre of
the cone and push the pole up until it’s vertical.
Once the centre pole is in you can now put the door
poles in place. There should be 4x poles. 2 for each
door.
TIP: if the doorway is struggling to stay vertical. Please use a ribbed peg to tack one of the door guy
ropes in place. While you complete this stage.
TIP: Please close all doors before tensioning to insure you have equal tension.
Using the thicker ribbed pegs, peg out the guy ropes
at least 1m around the tent, not putting any of them
under too much tension
Adjust the guy rope slider so you have approx. 50cm of
loop to the peg. Make sure the tent is symmetrical and
the tension is evenly spread.
Once the pegs are in, adjust the guy ropes for desired tension. Your Tent should look as pictured.
4.