www.boutiquecamping.com
|
+44 (0)203 394 2986
|
www.boutiquecamping.com
|
+44 (0)203 394 2986
|
5
5
• Put the A frame together and place inside the door - it’s
easier to get it through the door if you complete putting it
together once inside. Put the spike through the hole at the
top of the door and at the feet into their holding pockets.
Then go outside the tent and screw the rain cap on.
• Zip the door shut and attach the extra long guy rope
above the door. Then using the thicker ribbed peg, peg
out the guy ropes around the whole tent without putting
any of them under too much tension.
• N.B. All the guy ropes need to follow the lines of the
seams in the roof. Adjust the guy rope slider so you have
approx 50cm of loop to the peg. This allows adjustment
in both directions. It is important to make sure the Bell
Tent stays symmetrical and that the tension is evenly
spread. The pegs should be at least 1m from the tent.
6