9
ALL METAL MODE:
There are two ways to enter the
ALL-METAL mode.
1) Press the Disc/All Metal touch pad.
or
2) Turn the detector on. (The detector
always defaults to the All Metal
mode when first powered on).
DISCRIMINATION MODE:
To enter DISCRIMINATION mode,
1) Press the Disc touch pad, and
2) Turn the Disc/Notch control knob
clockwise.
In the DISCRIMINATION mode, the
detector will emit three distinct
tones, depending on the type of
metal detected.
As you turn the Disc Knob
clockwise, you will progressively
“discriminate out,” or eliminate from
detection, different types of metals.
Refer to the illustration below as a
reference for the levels required to
discriminate out different objects.
The DISCRIMINATION mode is a
fixed-start-point system. As you turn
the knob to the right, more objects are
progressively eliminated, including the
items to the left. Use
DISCRIMINATION for coin-shooting
and detecting in trashy areas.
If you encounter certain bothersome
trash items, program their rejection
into your detector as follows:
1) Turn the Disc/Notch knob 100%
counterclockwise.
2) Pass the undesirable object under
the search coil.
3) Turn the Disc/Notch knob slowly
clockwise until the object is no
longer detected.
AUTO NOTCH MODE
To enter the AUTO NOTCH mode,
press the Auto Notch touch pad. In
AUTO NOTCH mode, iron, most pull
tabs, and screw caps are automatically
eliminated.
In addition, you can turn the Disc/Notch
control to selectively eliminate more items
beyond the pre-programmed ones.
You can eliminate unwanted items in the
middle of the magnetic spectrum, but
still retain more valuable nickels.
AUTONOTCH is useful to “notch out”
specific unwanted items.
MODES OF OPERATION
ALL METAL TOUCHPAD
DISC TOUCHPAD
AUTO NOTCH TOUCHPAD
