Configure the rotation range - both
arrows must be pointing in the same
direction. Default configuration is
270˚. Insert 2x limit screws.
1
Fixings Kit
Faceplate
Tablet Set-up Kit
Sheet Code:
BP-OR-IM-040_REV1
Release Date: 26/09/2019
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Attach the mounting arm. The
mounting arm must forward lean in
the same direction as the two arrows.
Using the hole template (see step A
or B), mark the hole positions specific
to your chosen fixing method.
2
3
A1
B1
Mark ‘A’ positions for “Fixing from above”
(
Ø
2.5mm drillbit). Mark ‘C’ for the cable hole.
(
Ø
20.0mm Holesaw).
Mark ‘B’ positions for “Fixing from above”
(
Ø
5.0mm drillbit). Mark ‘C’ for routing the cable
hole. (
Ø
20.0mm Holesaw).
Case
Rotate
Swivel Desk
Assembly Instructions
Tools Required:
Pencil
Electric Drill
Socket Driver
16mm
Holesaw
*if routing the tablet
cable through your
mounting surface
7mm Spanner
*or adjustable spanner
2.5mm Drillbit
*if fixing from above
5.0mm Drillbit
*if fixing from below
Desk Mounting Arm
Pair of Keys
In the Box
Fixings List
* Due to the modular nature of our product range
you may receive additional fixings in the fixings kit
4x M4x40mm
Socketset
screw
4x M4x20mm
Buttonhead
screw
4x M4x16mm
buttonhead
screw
4x M4 Split
washer
4x M4
Locking
nut
2x Limit
screw
1x Case
washer
4x M4
Wing nut
4x M4
Washer
4x No.8
Countersunk,
self tapping
Screw
Follow steps B if “Fixing
from below”.
B
Follow steps A if “Fixing
from above”.
A
25
mm
Metric
Imperial
1"
Maximum Mounting
surface thickness :
34
mm
Metric
Imperial
1
5/16"
Minimum Mounting
surface thickness :
180˚ limit screw
position
180˚ limit screw
position
90˚ limit screw
position
90˚ limit screw
position
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
Limit Screw
Slotted
Driverbit
T20 Pin Torx
Driverbit
M4x16mm
Buttonhead
screw
Front
C
A
A
A
A
Ø65.5mm
46.0m
m
Front
C
B
B
B
B
48.0mm
Drill the
required
holes.
4
