1.
Place the Case on a
fl
at surface and turn your iPad
o
ff
.
If your iPad screen is cracked or damaged, do not
install into the Case.
2.
Plug the Lightning connector into your iPad, making
sure it is in the orientation shown above.
3.
Press your iPad down into the case as shown above,
making sure the cable is tucked under the lip.
4.
Hold the Case
fi
rmly at the cable end and press your
iPad into the case, making sure your iPad is tucked
under the lip along that edge.
5.
Hold the Case steady and press the opposite end of
your iPad down into the Case.
MOBI CASE
INSTALLATION GUIDE
1.
BP-MOB-ART-00001_REV1
