6
QUICK REFERENCE GUIDE
Step 5:
A) Start working with two inch sections about 1/2 of an inch
thick at a time below the part line you just created. Remember
to keep the
BOUNCE™
1/4 inch from your scalp to avoid
contact with the hot tool.
A
B) Lift the section of hair upward at a right angle from the head
or higher and hold tightly. Place the hair in the
BOUNCE™
,
close, and hold for a couple of seconds, move the
BOUNCE™
1/4 of an inch out and hold for a couple of seconds. You just
made two wave formations.
B
2 inches
1/4”
away
from
Head
www.bouncetutorial.com
BounceInstructManualF51811.qxd 5/18/11 11:59 AM Page 8
