BouMatic Robotics MR-D1, Service Manual

Page: 399 / 446

Maintenance
Every service
23 June 2015 Version 1.7 Page 25-57
25.22. Checking compressor
Steps To check the compressor, follow the steps in
Scheme 25-22 .
STEP ACTION
1. Read the pressure on the reduce valves (see Figure 25-63 ).
Pression reduce circuit (1) 1 bar
Crush security (2) 5 bar
Blowing off milk (3) 2 bar
System pressure (4) 6 bar
Figure 25-63 Reduce valves
2. Adjust, if required, the pressure until the correct value with the knob at
the upper side of the reduce valve (see Figure 25-64 ).
 Pull the knob up (1) and turn the knob (2) to adjust the pressure.
 Push the knob down to lock.
1
3 4
2