BouMatic Robotics MR-D1, Service Manual

Page: 397 / 446

Maintenance
Every service
23 June 2015 Version 1.7 Page 25-55
25.21. Checking oil level hydraulic pump
Checking oil level
hydraulic pump You check the oil level hydraulic pump on the
indicator (1) (see
Figure 25-61 ) at the pump,
which is located at the back side, at the upper
side of the milking box.
Figure 25-61 Hydraulic pump
Replacing oil Actually you replace hydraulic pump oil during
service 1. You check the level to examine if it has
to be replaced earlier or that there is a possibility
of oil leakage.
Steps To check the hydraulic pump oil level, follow the
steps in
Scheme 25-21 .
STEP ACTION
1. Press the emergency stop button on the milking box (see Figure 2-2 ).
2. Loosen the red button (1) (see Figure 25-62 ) to unpressurize the
accumulator.
1