BouMatic Robotics MR-D1, Service Manual, Page: 386 / 446

Maintenance
Every service
Page 25-44 Version 1.7 23 June 2015
STEP ACTION
4. Press valve 19 (1) (see Figure 25-48 ) to switch on vacuum on the
pipes to the milking system.
The area within the orange lines (1) (see
Figure 25-49 ) in
PROCESS
VIEWER
displays the changes that occur.
 The lines which represent the pipes to the milking system are
colored yellow.
 Symbol 559 colors blue, to indicate that the vacuum pump is
switched on.
 Valve 19 colors green, to indicate that vacuum to the milking
system is switched on.
Figure 25-49 Process viewer
Then you wil start testing pulsation one by one at the milking cups.
5. Press the 11 valve (2) (see Figure 25-49 ) to open the vacuum valve of
milking cup
LEFT REAR
.
Valve 11 colors green (see Figure 25-50 ), to indicate that the vacuum
valve is open.
6. Press the
PULS LR
button (3) (see Figure 25-49 ) to start pulsation on
milking cup
LEFT REAR
te starten.
7. Put your finger in milking cup
LEFT REAR
.
Milking cup is pulsating properly
8. Press the
PULS LR
button to stop pulsation on milking cup
LEFT REAR
.
1
2
3