1. Unpackage and take out the accessories, let it stand 24 hours.
2. Before using it for the first time, clean the inside and outside of the car refrigera-
tor (basket as well) with a damp cloth and wait until it gets dry.
3. Place your refrigerator at a proper position which depends on your use scenario
（car, truck, RV, camper, Van, Jeep, SUV, boat, home, etc.）
4. According to your use scenario, please choose the right power cord (AC cord or
DC cord) for the right power supply. Please read the next part carefully for the
details.
4.Preparing Before Use
Installation Instruction of Car Refrigerator Fixed Handle Seat
Step 1: To disassemble
the screw
(M6.16)
with the
hex key and keep the
screw.Total 8 pcs screws.
Step 2: Put one fixed
handle seat parts on the
two holes and install the
handle parts with screw
by using the hex key.
Step 3: Put the handle tube
into the installed hand seat,
pay attention to the direction
of the groove,and align the
inner diameter of the handle
hole.
Step 4: Put another handle
seat parts on the handle
tube and also pay attention
to the direction of the
handle tube.
Step 5: Align the mounting
screw holes and tighten
them with the hex key and
screws.Pls also install the
other handle on the other
sides with the same way.
