11
7
9
12
11
After removal of stuffed balloon, place the pink stop-
per side securely onto the pump handle for
inflation.
WARNING
– Over inflating the balloon could cause
it to burst! While inflating the balloon check balloon elasticity to
make sure you have not overinflated the balloon.
11
13
14
10
8
Twist the clear dome counter-
clockwise to unlock and remove the
dome. Gently remove the
Stuffaloons balloon.
Place the clip around the twisted opening
of the balloon and snap it closed. Clips can be used
multiple times.
Tip: Option to seal balloon with ribbon or string.
13
14
Remove rubber o-ring and
pink stopper once balloon is sealed.
12
Now you’re ready to seal your balloon. Pull the stopper
gently away from the balloon to stretch the opening and
gently twist the stopper.
DO NOT PULL THE STOPPER OUT!
Manufactured by ©2020 BOTI Global Ltd., Unit 404A-5,
4/F/ Tower I, South Seas Centre 75 Mody Road, TST,
Kowloon, Hong Kong. www.bot-i.com.
[email protected].
@bigontoyinnovation
Place the larger side of the pink stopper gently into the opening
of the balloon that is sitting in the dome to seal in all air. Be
careful not to let the stopper fall inside.
6
Check to make sure the
balloon opening is securely fitted
around the pink stopper. Then
firmly lift the blue ring up and over
the stopper. No air should escape.
7
Before inflating the balloon
with the pump attach the rubber
o-ring to the neck of the balloon.
Stretch the o-ring over the stopper so
it fits around the neck of the balloon.
9
See arrow for ring position.
Now you can inflate the balloon.
The rubber ring will be removed
after the final stage of fixing the clip to
seal the balloon.
10
Distributed by Jay at Play Int’l HK Ltd.
817 Houston Centre, 63 Mody Road, TST East Kowloon, Hong Kong.
6
Pink Stopper
