Botex MPX-405, User Manual, Page: 3 / 12

Introduction:
Thank you for your purchase of this Botex Professional product.
Every unit has been thoroughly tested and carefully packed before delivery.
Unpack the shipping carton carefully, check carefully for sure your new unit
is not damaged and all accessories not missing. In the event damage has
been found or parts are missing, please do not use it and contact your auth-
orized dealer immediately.
Unpacking:
Warning!
This product must be grounded. Do not spill water or other liquids into or on to
your unit. To prevent or reduce the risk of electrical shock or fire, do not expose
this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself. Should you experience any problem during use, please contact your
local dealer immediately.
Do not discard the shipping cartoon in the trash. Please recycle when ever
possible.
Fuse replacement:
Disconnect the unit's main power. Insert a standard flat screwdriver in to the
fuse holder housing. Turn the screwdriver in counterclockwise direction to
release the fuse holder. Remove the old fuse and replace it with the same
type. Insert the fuse holder back into its housing and turn in clockwise direction
to lock the holder in place.
Multi-Pak Instruction Manual Page 3
This unit is a four channel DMX/ MIDI pack. This unit can be used as a four
channel stand alone chaser, also you can use any DMX controller or MIDI to
control this unit. Moreover, this unit can be wireless controlled by the optional
remote control(sold separately). This unit has built in memory to save and
retain your data in case the unit's power is accidently disconnected.
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of this
unit.