Botex MIDEA TRIGGER, User Manual, Page: 8 / 10

Operation Guide
5
Software Launch
1) Function Instructions of Icon
1.1) Create New Event
Click “Create New Event”icon on the upper left corner, the contents in the
Event List will be automatically cleared.
1.2) Open Event
Click “Open Event” icon on the upper left corner to select an event folder that the
contents in this folder will be listed in the Event List.
10
DMX First Ch: the selected start channel.
DMX Last Ch: the selected stop channel.
Increment Ch: sets DMX channel change status.
DMX Level: sets the output DMX level.
For example, set the parameters as below:
DMX First Ch: 1
DMX Last Ch: 5
Increment Ch: 1
DMX Level: 200
When this event was triggered, the DMX level is 200 for channel 1-5.
When this event stopped, the DMX level is 0 for channel 1-5.
If set the Increment Channel as 2, when the event was triggered, the DMX level is
200 for channel 1, 3, 5; when the event stopped, the DMX level is 0 for channel 1, 3,5.
3.2) Time Trigger Event(Time)
This event enables to synchronously trigger DMX output with the external time.
This external time consists of LTC of SMPTE and MTC of MIDI.
In Time Code Configuration, the “Start” means the designated time to start and the
“Stop” means the designated time of end.
In Trigger DMX, the definitions of DMX parameters can refer to the instructions in 3.1.