Botex ART-4 RGBW, User Manual, Page: 34 / 44

6.9 Factory defaults
To unlock, press and hold [P] and [B] simultaneously for about ten seconds.
ð
The LEDs of all buttons flash briefly once. All settings and the saved scenes are set to
the default values. The user-specific settings are deleted. The fade time for switching
on the device and for changing the colour is set to 2 s.
6.10 Data transfer
Up to 32 ART-4 or ART-9 DMX controllers can be networked and controlled with each other.
1.
Press and hold [C] , [B] , [S] and [P] simultaneously for five seconds.
ð
The LEDs of the [C] , [B] , [S] and [P] buttons flash. The device is ready for data transfer.
2.
Press [S] to transfer the data of the current device to the connected devices.
ð
The LEDs of the [C] , [B] , [S] and [P] buttons light up consecutively. This process can
take up to ten seconds.
Operating
34
ART-4 RGBW / ART-9 RGBW
DMX controller