- Screen Mode
When program transmission is in 16:9 and you have a TV set with the 4:3 picture
format you can select Full screen or Letter Box picture format.
- UHF Mode
If TV is connected by RF cable, you can select the RF modulator type RF modulator
type affects a programs audio.
<Time Setting>
If a broadcaster porvides GMT, you can set
the time using GMT, or set your own time by
yourself. If the GMT usage is on, Current
time is automatic ally set and you can only
set the time zone. If you set GMT Usage to
OFF, "Set Data" and "Set Time" item are
displayed. To set date value press
OK
button
on the item then calendar window is displayed.
You can select date from calendar. To set
time value move cursor to time item and use
numeric button on the remote controller.
<screen 30>
- UHF Channel
When TV is connected by RF cable, you must select RF channel number to the same
value on the TV. If other number is selected the picture will not be viewed.
<System Information>
Shows the system information including the
Firmware version and model name.
<screen 32>
<Clear Data>
- Factory Default
: Deletes all the data
currently saved and set.
and returns the system
to the initial status.
- Erase All Channel
: Deletes only the saved
channel datas other
setting values are not
deleted.
<screen 31>
22
Setting and Operations
Setting and Operations
<Irdeto>
- CA Status
CA status displays.
Smart Card EMM/ECM information.
<screen 33>
<Common Interface>(CI Model Only)
You can navigate the menu, which is
provided by CI Module.
This information varies a lot depending on
the service provider.
<screen 34>