Under Work Surface
Keyboard Trays
2
1
2
3
Mount the keyboard track mounting bracket (C) with keyboard track (D) attached to the underside of
the work surface using eight #12 x ¾” Phillips pan head sheet metal screws (E). For optimal use, mount
the front of the bracket outside the front rail of the workstation (Fig-3).
Refer to the manufacturer’s assembly instructions on how to mount the keyboard tray with/without
mouse platform to the keyboard track (D).
Align the holes on keyboard track (D) with the holes on keyboard track mounting bracket (C) as shown
in Fig-1. These two pieces should be nearly flush on the end where the keyboard track rear tab stops
are located. Use six #10-32 x ½” Phillips pan head machine screws (A) and six #10-32 Kep nuts (B) to
connect keyboard track mounting bracket (C) and keyboard track (D) (Fig-2).
A
D
D
Fig-2
Fig-1
Fig-3
E
C
C
Rear Tab Stop
Rear Tab Stop
Front
Front
Front
Back
Back
Back
B
C
