WIRELESS ID
TRIM LEVEL
INPUT
DC24V
2.5A
R
L
POWER
1 2 3 4
2
3
1
WIRELESS ID
TRIM LEVEL
INPUT
DC24V
2.5A
R
L
POWER
1 2 3 4
2
3
1
MUTE
1
2
3
4
5
6
7
8
9
The Parts of TVee
1
Status Indicator – Lights in various colors to indicate operating status. See the table below.
2
Power Button – Lets you manually activate TVee or put it in standby mode.
3
Mute Button – Lets you temporarily mute TVee.
4
Volume Up and Down Buttons – Let you manually adjust the volume of the TVee.
5
Wireless ID Switch – Selects the “channel” for the wireless Bass Unit signal. Set
11
in the same position.
6
Trim Level Switch – Adjusts the input sensitivity of TVee.
7
Inputs – Receives the input signal for the TVee. See the “Connect TVee” section for more information.
8
Power Input – Connect the power supply
10
here.
9
Power On/Off Switch – Turns the TVee soundbar on or off. Normally it is left on all the time.
10
Power Supply – Provides power to the soundbar. Plug it into the wall and connect it to the power input
8
.
Soundbar Status Indicator
Green Steady
Normal power-on mode.
Green Blinks Once
Shows a remote control signal is being received.
Orange Flashing
TVee is ready to learn a remote control command.
Orange Steady
The control button that’s learning a control command is selected; TVee waiting
for an IR command to learn.
Flashing Green
TVee has successfully learned a remote control command.
Flashing Red
TVee has failed to learn a remote control command.
Flashing Red and Orange
Indicates learned IR codes successfully erased.
MUTE
10
Audio connection cable
142-002882-B Owners Manual TVEE 3 3
8/9/07 1:34:02 PM
