4
How to Wire Your Speakers
You need to wire your speakers correctly to obtain the best sound quality and the proper image.
Wiring should just take a few minutes, but it’s important to do it carefully, since incorrect wiring
(such as reversed connections) can result in a poor soundstage or poor bass.
We recommend using 18-gauge or larger speaker wire for runs up to 25 feet (8m), and thicker
16-gauge or larger for longer runs. Strip
1
⁄
2
" (12mm) of insulation off the ends of each speaker
cable to expose the two conductors and tightly twist the wire strands. Maintain consistency of the
+
(red) and
–
(black) connections by using the markings on the wire.
IMPORTANT:
Typically, one side of the wire is smooth. Connect
this side to the
–
(black) connection. The other side has a rib or
stripe. Connect this to the
+
(red) connection.
Micro80x Satellites and Micro80c Center Channel
Using the five-way binding posts:
The binding posts permit easy connection to banana plugs,
pins, spade lugs, and bare wire. The metal surfaces are plated with 24K gold to prevent corrosion.
Micro80pv Subwoofer and
Micro80e Effects Speaker
Push down the buttons and insert the wire
where shown. Be sure to connect
+
to
+
(red) and
–
to
–
(black).
L
R
Speaker level input
Insert the wire in the hole
and tighten.
To connect two wires to one terminal, first twist
them together. Then insert the wire in the hole
and tighten.
