Boston Acoustics SPOT, User Manual

Page: 48 / 55

42
R 2.0
V A
SER
VICE & REP
AIR
TURNING SPOT OFF
1. Walk Spot to charging, storing, or transport
location. Walk Spot instead of carrying it
whenever possible.
2. Sit Spot.
3. Power off motors with controller.
4. Engage lockout button.
5. Power off robot by pressing and holding
blue button at Spot’s rear for two seconds.
6. Select controller’s Disconnect option.
7. Take battery to charger or plug robot into
power source.
SHIPPING
ROBOT
To ship Spot, remove the battery and load Spot
and the controller into the case.
BATTERY
The Spot Battery is considered Fully Regulated
Dangerous Goods by the International Air Trans-
port Association (IATA). Air shipment of any Spot
Battery is subject to UN3480 - PI965, Section IA,
which is covered under IATA regulations (
https://
www.iata.org/ ).
It is your responsibility to ensure compliance
with these requirements when shipping any Spot
battery. Always check the full regulations and
carrier requirements before shipping.
Notable requirements include:
• Batteries must be properly packed in a UN-ap-
proved container, labeled, and declared ac-
cording to IATA Dangerous Goods Regulations.
• The battery state of charge must be =< 30%
of rated capacity.
• The weight limit per container is 35 kg.
• The battery may be shipped by cargo aircraft
only.
• The shipment must be signed by a person
certified in accordance with IATA Dangerous
Goods Regulations.