9
Displaying the alarm time
When an alarm is set, press the
Alarm Set
button above the appropriate
Alarm 1
or
Alarm 2
button to check the respective alarm time setting.
The alarm time will display for 3 seconds. The display will revert to
its normal readout (either current clock time or radio frequency if the
Radio power is on, or current clock time if the Radio power is off ).
Turning off the alarm when it is sounding
1. To turn off the alarm, press the
On/off
button on either the top or
front of the Radio or on the Remote Control. The alarm will reset.
2. To disable the alarm completely, press the
Alarm 1
(or
Alarm 2
)
button repeatedly until the “Alarm” indicator is no longer visible in
the display.
Dual alarms
If one alarm is sounding or in the Snooze/sleep mode when the second alarm sounds, the first alarm
is reset.
Using the Snooze function
1. When the alarm sounds, push the
Snooze/sleep
button (or the
Sleep
button on the Remote Control) once to silence the alarm for 10 minutes.
2. If the
Snooze/sleep
button is pushed again within 3 seconds of the
first push, 5 minutes will be added to Snooze/sleep time, up to a maximum
of 60 minutes.
Example:
If the button is pushed rapidly three times,
the Radio will go into Snooze/sleep mode for 20 minutes (10 + 5 + 5 minutes).
3. Once the Radio is in Snooze/sleep mode, tapping the
Snooze/sleep
button
will display the remaining Snooze/sleep time for 5 seconds.
Alarms
Setting the alarms
1. Press the
Alarm 1
or
Alarm 2
button to choose the desired alarm
mode — one press for Music , two presses for Tone , and three
presses to turn it off. The display will indicate if an alarm is set and its mode
of operation.
2. Press the
Alarm Set
button above the
Alarm 1
(or
Alarm 2
) button.
3. Turn the
Tuning
knob to the desired time.
4. Turn the
Volume
knob to adjust the alarm volume.
Music Mode
Tone Mode
042-002310-E Recepter Radio HD Manual.qxd 11/7/05 3:15 PM Page 9
