2
Specifications
VR910
VR920
Frequency Response (±3dB)
65–20,000Hz
55–20,000Hz
Recommended Amplifier Power
15–150 watts
15–250 watts
Nominal Impedance
8 ohms
8 ohms
Sensitivity [1 watt (2.83v) at 1m]
89dB
90dB
Bass Unit
5
1
⁄
4
" (135mm)
dual 5
1
⁄
4
x 7
1
⁄
2
" (135 x 191mm)
Midrange
–
3
1
⁄
2
" (89mm)
Tweeter (metal dome)
1" (25mm)
1" (25mm)
Passive Radiator
5
1
⁄
4
" (135mm)
–
Crossover Frequency
3,000Hz
300, 2,700Hz
Dimensions (HxWxD)
6 x 20
1
⁄
8
x 6
1
⁄
2
" 6
3
⁄
4
x 27
1
⁄
8
x 10
1
⁄
4
"
(153 x 511 x 163mm)
(172 x 689 x 261mm)
Weight
15 lbs (7kg)
32 lbs (15kg)
Finish
Charcoal grey cloth
Charcoal grey cloth
and vinyl veneer
and vinyl veneer
with gloss black sides
Description
The Lynnfield VR910 and VR920 center channel speakers deliver the wide-range response, high power-
handling, high efficiency and placement flexibility required by the finest home theater systems. Each model
has a wide and even dispersion. Therefore, the sound will remain consistent and uniform for listeners
throughout the room, assuring that everyone has the “best seat.”
Placement
Place the center channel speaker above or below the
television monitor, as close as possible to the center of
the screen. It is not necessary to angle the speaker to
face the listeners. The speaker is magnetically shielded
with MagnaGuard
®
and will not affect the television’s
picture. Use the four self-adhesive rubber feet (provided)
to protect the TV’s finish and reduce vibration.
Connection
WARNING:
To prevent an electrical shock hazard, always switch off the amplifier or receiver when making
connections to the speaker.
We recommend 18-gauge, or thicker, wire for runs up to 25 feet (8m) and 16-gauge, or thicker, wire for longer
runs. Separate the first few inches of the wire conductors. Strip off
1
⁄
2
inch (12mm) of insulation from the ends
of each speaker wire to expose the two conductors and tightly twist the wire strands.
BA488 VR910/920 Manual 3/00ƒ 3/1/01 11:43 AM Page 2
