5
STAND OR SHELF:
Peel off the included rubber
feet from their adhesive backing and stick them on
to the four bottom corners of each speaker.
KEYHOLE BRACKET:
Consult a knowledgeable
installer regarding the proper hardware to use on
your wall surface. A 1-inch (25mm) long wall anchor
is recommended for hollow walls. Regardless of the
type of wall fastener used, the screw head diameter
should be between
5
⁄
16
and
3
⁄
8
-inch (8 to 9.5 mm) to fit
properly inside the keyhole and slide down on to the
slot. When wall mounting your speakers with the
keyhole bracket, apply the rubber feet to the four
stand off pads on the rear of the speaker to prevent
any scratching or marring of the wall surface.
CRB BRACKET:
This optional stand-off/swivel
bracket can be purchased from your dealer or
ordered directly from Boston Acoustics using the
included order form. The CRB attaches to the back
of the speaker using the four mounting holes located
at either side of the keyhole bracket. Instructions on
how to attach this bracket to the speaker and mount
the assembly to the wall are supplied in the CRB kit.
Stand off pads (4)
Keyhole bracket
CRB mounting
holes (4)
3
⁄
8
‘’(9.5mm) hole
Basic Hookup
1. Connect the speaker terminals to the amplifier speaker outputs.
2. When making all connections, be sure to connect
+
to
+
(red) and
–
to
–
(black).
Mounting Options
Your CR speakers have several convenient mounting options: