background image

MAINTENANCE: Always remove light from power source before performing any maintenance. Light cannot be 

washed in water. If dirty, unplug from power source and wipe with a clean cloth.

LUMENS

EFFICACY

KELVIN

WATTS

CRI

600

85

6500

7

80

For troubleshooting, questions and customer care, please visit us at 

BostitchOffice.com or contact us at 1-800-343-9329.

THREE-YEAR LIMITED WARRANTY

Effective January 1, 2021 Goods iQ warrants to the original retail purchaser that the product purchased is free 

from defects in material and workmanship, and agrees to repair or replace, at Goods iQ’s option, any 

defective Bostitch® branded clamp lamp three (3) years from the date of purchase. Warranty is not 

transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in 

material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, 

abuse, accident, or repairs attempted or made by other than our national repair center or authorized warranty 

service centers. You are responsible for the costs of shipping the defective product to Goods iQ.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF GOODS IQ, AND IS IN LIEU OF ALL OTHER EXPRESS 

WARRANTIES INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURCHASE. GOODS IQ SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, 

INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so 

the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and 

you may also have other rights which vary from state to state and country to country. For information on our 

warranty claim procedure, please contact us at 1-800-343-9329. 

USA & Canada:

Manufactured under license by: 

Goods iQ

North Kingstown, RI 02852

800.343.9329

Made in China

Bostitch

®

 and the Bostitch

®

 logo are registered trademarks of Stanley, Black & Decker Inc. 

or one of its affiliates, and used under license. 

USAGE AND CARE

 

• Do not pick up and carry light by its arm

  • Always hold the light base while adjusting the arm

 • 

Lights should not be covered with flammable objects (cloth, paper, etc.)

 • 

If any irregularities are detected during use, turn off and remove from power source immediately

       

WARNING:

 • 

Do not come in contact with the light, cord, plug, and/or socket with wet hands

 • 

DO NOT USE WITH DIMMERS

       

CAUTION: 

 • 

Avoid putting the light on an uneven surface to prevent toppling or damage

 • 

Avoid usage in high temperature areas (104°F/40°C)

 • 

Avoid usage in humid and wet areas (showers, outdoors, etc.)

 • 

Avoid putting next to a heater

 • 

Do not use force when adjusting the light arm

 • 

Do not attempt to dismantle, modify, or force the light apart

 • 

Do not insert objects into the light

 • 

If not in use for a prolonged period of time, unplug light from power source

Summary of Contents for VLED600

Page 1: ...atulations on the purchase of your Bostitch product Please read these instructions completely and carefully before using this product Keep this instruction sheet for future reference To register your product visit BostitchOffice com New Product ...

Page 2: ...C Avoid putting light next to heater Lights should not be covered with flammable objects cloth paper etc SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE CAUTION To reduce the risks associated with environmental contamination which if not avoided could result in minor or moderate injury Dispose of task lights in accordance with applicable local government regulations INTENDED USE Bostitch D...

Page 3: ...F Press the power button once to turn the light on Press the power button again to turn the light off ASSEMBLY Turn the handle at the bottom of the tail stop counter clockwise to open the clamp Slide the clamp onto the mounting surface and turn the tail stop handle clockwise to tighten Confirm that the clamp is securely fastened before proceeding to the next step Loosen and remove the knob from th...

Page 4: ...T BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states and countries do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state and country to country For information on our warr...

Reviews: