-7-
A. POWER BUTTON: Press the power switch
to turn the unit on. When the compressor is on, the
motor and pump will compress air until tank
pressure reaches the upper limit of the factory set
operating pressure. When tank pressure falls below
the factory set “cut in” pressure, the compressor will
again automatically start to compress air.
B. REGULATED PRESSURE GAUGE: The regulated
pressure gauge indicates the amount of pressure
that is allowed into the discharge line (E) according
to the setting of the regulator.
C. REGULATOR KNOB: The regulator knob is used to
adjust the air pressure that is available at the
discharge line. The discharge air pressure is
increased by turning the knob clockwise and
decreased by turning the knob counter clockwise.
D. DRAIN COCK: Twist style valve that drains
moisture from the tank when opened.
E. QUICK CONNECT: This compressor is equipped
with a quick connect designed to accept a light
series connector plug.
FEATURES OF THE BOSTITCH TRIM-AIR
A
B
C
E
D
Summary of Contents for CAP1516 TRIM-AIR
Page 26: ......
