Base fasteners can be used to connect two base plates
together.
06
Bosswerk GmbH & Co. KG
Tel: +49 (0) 2153 -127 82 69 - [email protected] |
www.greenakku.de Add - Herrenpfad 38, 41334 Nettetal,
Nordrhein-Westfalen, Deutschland
Step
8
.
Start the system
Insert the plug to the socket and the system will start producing
power after about a two-minute waiting time.
Step
7
.
Fix the base plate
Put weights (Brick, Stone etc.) on the base plate to promote the
wind loading rating of Easy Solar Kit.
CAUTION
Weights (Brick, Stone etc.) should be more than 20kg.
Or use base fasteners and nails to fix the base plate to the
ground.
Figure: Weights on the base plate
Figure: Optional accessories for the connection of base plate
Figure: Base fasteners and nails
04
05
Step
5
.
Extend the cable (optional)
Extension cable (GreenAkku ANW5,-10,-15,-20,-30) can be used
to extend the cable.
Dis
assemble
the end cable.
Connect the two sides of extension cable to the
microinverter (AC) and the AC socket.
Abbildung: Schließen Sie das Verlängerungskabel an
Figure: Disassemble the end cable
Step
6
.
Install more Easy Solar Kit (optional)
More Easy Solar Kits can be connected together to form a whole
system.
Take out the end cable of the second Easy Solar Kit. Connect the two
sides of Extension Cable to the first and second microinverter.
Figure: Connect the Extension Cable
