8
TIG WELDING MACHINE SET UP
WARNING!
Ensure the machine is turned off and disconnected from the power supply before
performing any of the following operations.
Fitting the TIG Torch, Work Clamp & Gas Leads
1.
Plug
work clamp
connector into the
Positive
terminal.
Twist to ensure a good connection.
2.
Plug
TIG Torch
into the
Negative
terminal. Twist to ensure
a good connection.
3.
Connect gas line to regulator on gas bottle.
Note: CHECK FOR LEAKS prior to welding
Welding Setup
4.
Connect the work clamp firmly to the work-piece ensuring
that the clamp makes good contact with bare metal.
5.
Plug the machine 10Amp input power lead into the wall
socket, ensuring that the power switch on the machine is in
the OFF position.
6.
Turn the power outlet on and turn on the machine on using
the power switch on the rear of the machine
7.
Carefully open the valve of the gas cylinder. Adjust to
required gas flow rate as indicated on the regulator.
8.
Select TIG welding mode by pressing the Welding Process
Selection Button until the TIG Welding Process Indicator
Light is illuminated.
9.
Rotate the Adjustment Knob to set the welding current as
required.
NOTE: TIG TORCH SOLD SEPERATELY
Electrode Holder
Work Clamp
