3.2.4.1
Binding And Ignoring Sensor Pucks
To bind a sensor to the receiver, you will need to select a sensor from the FREE sensor list and bind it to the
receiver. To access the FREE SENSOR LIST:
> MAIN MENU > SENSOR LISTS > FREE.
The FREE SENSOR LIST displays all sensors which
have been seen by the receiver, and currently
not bound to the receiver. Each sensor listed is
displayed with list index, sensor serial number, and
the elapsed time since last update.
Example:
“1: 1366, 3S”
means the NEST received the
last data update 3 seconds ago from the WASP
sensor with serial number 1366.
To bind a sensor, scroll up/down and highlight a
sensor from the FREE sensor list. Once found, tap
SELECT
to move to BIND/IGNORE screen.
BIND
will add this sensor to this receiver’s data-
base
IGNORE
will ignore the sensor allowing another
receiver to pick up that sensor. This is useful in large
installations where you may have overlap between
the effective range of sensors and receivers.
After BIND action is selected, you need to select an
input to attach the sensor to. Attaching to an input
allows the information to be pulled for that individ-
ual sensor via MODBUS. The SELECT INPUT screen
will highlight the next “available” input and will also
show the current bound sensor inputs. Choose
SELECT
to attach to next available input or scroll to
desired input and SELECT.
The NEST Receiver will request confirmation to bind
the sensor to the selected input, tap
YES
or
NO.
The receiver will jump back to the FREE list screen
after the confirmation allowing this process to be
repeated.
Repeat this process until all the sensors you would
like to bind are bound to the receiver.
2021
16
