EA000405
–
B
OARDER
R
OUTER
4
1.
Commission/Joining Border Router to a network
1
Installation
The EA000405 Border Router must be installed by a professional or certified technician
conversant with the certification requirements of the installation site.
The EA000405 Border Router requires a voltage between 10 VDC and 24 VDC capable of
supplying up to 2A.
Unless otherwise specified the EA000405 Border Router ships with a 3 dBi antenna
(EA002058). The EA000405 Border Router is compatible with the following antennas.
BossPac PN
Gain
EH002058 (Standard)
3 dBi
EH002059
1.2 dBi
EH002060
8 dBi
EH000625
11 dBi
2
Commissioning
2.1
Set-up & Power On
-
Connect one end of the Ethernet cable to your ethernet router.
-
Connect the other end of the Ethernet cable to the border router (Figure 1)
Figure 1
-
Connect the Power Supply corresponding wires to Border Router power port (Figure 2)
