- Now, reboot your equipment.
=> PROCEDURE TO PUT ORIGINAL FIRMWARE
To put back original firmware version, firstly you have to request a modified firmware version.
- Go to upgrade firmware and put the modified firmware
- Access the radio via IP 192.168.2.1
- Go to upgrade firmware and put your desired firmware
- You can now access your equipment with default IP address ( from original version )
=> NOTES ABOUT MAIN OPERATION MODES
- There are 3 main operation modes:
Gateway
Bridge
Wireless
ISP
-- Gateway mode:
- With this mode, LAN1 (eth0 interface) + Wireless will be LAN (br0) Segment. LAN2 (eth1 interface) will be WAN
port. NAT will be enabled.
-- Bridge mode:
- All interfaces ( ETH0 + ETH1 + Wireless ) will be LAN (br0). All firewall functions will be disabled. NAT will be
disabled.
-- Wireless ISP mode:
- LAN1 + LAN2 ( eth0 + eth1 ) will be LAN (br0). Wireless (wlan0) will be WAN. NAT will be enabled.
=> HOW TO USE BANDWIDTH CONTROL
NOTE: This control uses QoS with HTB.
BAndwidth control it's done through Traffic Control menu, via web interface or via /etc/cbu.conf file. You can limit
all traffic via Interface control or you can control via IP and/or MAC basis. Further more, you can create QoS groups
and share the group rate amoung the members of that group. You can as well, guarantee minimum rate for group
member.
Ex:
Summary of Contents for BOSSW72
Page 2: ......
