65
6.3.14 Line Printer Daemon Setup
This WBT with WIN CE.NET offers another way of through LPD protocol to send the print job.
LPD is a built-in printing protocol in the BSD type of UNIX. However, it is also available in most UNIX system.
With LPD, users can using UNIX machine for printing purpose or any machine which supports LPD protocol.
6.3.14.1 Setup for LPD
If you plan to use LPD to print your jobs, you need to go through the Setup for LPD procedures as below figure.
1. Double click “
LPD
” in Control Panel tap.
In the below page, user can select one of the ports, LPT1, COM1 or COM2 port
to be the default printer port. When you select the COM1 or COM2 .You can also select the baud rate of COM1 or COM2
port.
2.Please enable “
Enable LPD
” so the WBT could activate the LPD function.
Click “
OK
” button to save the setting. or User can click “
Test
” button to perform test procedure.
3.After completing the saving procedure,
The WBT will automatic reboot to make the LPD service available.
And the message will appear on the screen and then click OK.
4.Or, user can press
“Test”
button to check if the printer has connected completely as user setting.
If connected completely the printer type name will appear on the screen.
For example: the connected printer is EPSON Stylus Photo 1270.
BOSSTX2B CE 5.0 User's Manual
