Chapter 5 Repeater setting
Please check whether the connection of RF cable is correct (donor antenna
connected to BTS port, service antenna connected to MS port), and whether every port
is stable. After affirmation, please go along the followings:
5.1 Power supply connection
After power supply connection, check ALARM and POWER indicators first.
Status and definition of POWER indicators:
Status and definition of ALARM indicators:
Status
Definition of ALARM
Green
Meaning: working in linearity
attention: Input signals may be not enough
Red
Meaning: overloading or self oscillation, strong input signals
Attention: cut the connection of equipment and service
antenna,then connect the MS port to load, if the red light
changes to green or orange, which means the isolation of
donor antenna and service antenna is not enough, then
please adjust the isolation.
If the red light still turning on that means over accepting of
donor antenna or strong interference, then please adjust the
place of donor antenna..
Orange
Meaning: it is working in linearity
Notice: Please adjust MGC to increase the attenuation
value, till you find the “edge point”, and let the repeater work
at this point.
Off
Repeater break down
Status
Definition
Green
Normal
Off
AC power problem
9