bossino Alliance Pro, Installation Manual And User'S Manual

Page: 10 / 26

Page 9
Preparation
Advanced Preparations:
Be familiar with the controls of the range hood by reading through • Range Hood Operations , Page 12.
Place the range hood on a flat, stable surface. Connect the range hood to a designated standard outlet (please •
refer the product label for the suitable voltage of this unit) and turn on the range hood. Verify all operations
of the range hood by referring to Range Hood Operations , Page 12.
Place all supplied parts and required hardware on a flat, stable surface and verify the existence of all supplied •
parts listed on Page 4.
Carefully remove the white plastic protective coat from the range hood. •
Preparations:
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
Determine and mark the center line on the ceiling where the range hood will be installed. Make sure there is •
proper clearance within the ceiling or wall for exhaust vent.
Due to the weight and size of this unit, please make sure that the support system or framework being used is •
stable and secure in the wall.
Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt. Remove •
any hazardous objects around the area when installing.
Mark the locations of the support mounting bracket holes, vent cutout (if used) and power supply cable cutout •
on the ceiling. Use drill and saber saw or keyhole saw to cut openings for power supply cable and vent (see
Venting requirements
and
Electrical requirements
, Pages 6-8).
If venting to the outside install vent system (see • Venting Requirements , Page 5). Use caulking to seal exterior
wall or roof openings.
Disconnect main electrical supply, prepare and run electrical wiring through ceiling or wall. Leave approxi - •
mately 12” of electrical cord hanging from the ceiling. Do not restore power until wiring is completed.
Disconnect power cord, remove the baffle filter by sliding the knob toward the metal filter handle. •
Set aside the baffle filters until the range hood is properly installed. •
CAUTION: If moving the cooking range is necessary to install the hood, turn OFF the power on an elec-
tric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.
WARNING
Severe Injury
Hood may have very shape edges. Please wear
protective gloves if it is necessary to remove
any parts for installing, cleaning or servicing.
WARNING
Excessive Weight
Require three or more person to move and
install this range hood. Spinal or other bodi-
ly injuries could occur if it is not followed.
WARNING
Severe Injury
Rotating fan can cause severe
injury. Stay clear of fan when
motor is running.