Antenna Connection
BOSSCOM DAB/FM tuner may be connected to any antenna designed for FM and the DAB reception, if the supplied
one is not sufficient.
o
If the FM signal strength is not sufficient the reception will be noisy.
o
If the DAB signal strength is not sufficient the reception is varying from
disturbing ”bubbles” to complete quietness.
o
If no signal is received the display indicates N/A.
Automatic Power Up and Down
As default factory setting the tuner is manually powered up and down with the
button. As the display is
automatically dimmed 10 seconds after any operation, powering the tuner down is not a strict requirement.
If automatic powering up and down with the source selection is desired, programming a specific option allows for
that.
Option Code
Function
Option 990
The tuner can only be
powered up and down, using
the
button.
Option 991
The tuner automatically
powers up and down.
Important Info about the Automatic Power Mode
When the automatic power option has been set, the tuner turns on and off automatically with the source selection.
But if the tuner’s clock has not been set, automatic power up and down is NOT possible.
The clock is automatically set 10-30 seconds after power has been applied to the tuner, provided a DAB station has
been received. Thus the automatic power option cannot be used if the tuner is switched off the mains regularly.
Menu
Pressing
enters the tuner’s main Menu.
Use the
buttons to select one of the sub menus:
•
Manual scan
•
Contrast
•
System reset
•
Software version
